Phase Converter manufacturer: Phase-A-Matic, Inc.Sizing Assistance
   HOME
.

.
Sizing Assistance For Air Conditioners

Fill in the following form for the proper sizing recommendation, one for each air conditioner. Then click on the SUBMIT BUTTON at the bottom of the page, and the form will be instantly sent via e-mail to the technical support staff at Phase-A-Matic, Inc. Once it is received, it will be reviewed by technical support to determine which converter would best suit your application, and you will be contacted by Phase-A-Matic, Inc. Thank you for your inquiry.

NOTE: Please fill in a phone or fax number, e-mail address or mailing address, or we cannot respond to this form.

1. Name:       Phone # *   

2. Fax #      E-mail:  

3. Enter same e-mail address for verification:

4. Address:   City:

5. State:  *    Zip Code:     Country of residence:

6. Your Company Name:
_______________________________________________________________________________________________
Machine Information:

7. Brand of AC unit (not motor)   Model # of AC unit:

8. Capacity, tons:         Country of mfr. of AC unit:    

9. LRA (Locked Rotor Amperage rating - this information is very important)

10. Compressor motor (main motor):

     Country of mfr. of motor      and brand of motor if known.   

     Nameplate voltage rating:   Horsepower:   FLA (Full Load Amp rating):

      kW rating:         KVA rating:         The motor is:
_______________________________________________________________________________________________
   
11. Additional motors:

    Condenser motor:   The motor is:

     Fill out the next 4 entries ONLY if the motor is three-phase.  

     1. HP:    2. FLA:     3. kW rating:    4. The motor is:
_______________________________________________________________________________________________

     Evaporator motor:   The motor is:

     Fill out the next 4 entries ONLY if the motor is three-phase.

     1. HP:      2. FLA:     3. kW rating:      4. The motor is:
_______________________________________________________________________________________________

12. Single-phase voltage available:         Cycles:    

13. 3-phase voltage required          Cycles:

14. 3-phase power required must be wye   or delta   doesn't matter   don't know

15. CNC or other electronic controls (variable frequency drives, rheostat, etc.):
    

16. Remarks:

For further sizing assistance call technical support at Phase-A-Matic, Inc.: 1-800-962-6976.   

Also see sizing information concerning:

Phase-A-Matic, Inc.  ·  39450 3rd St. E., Ste. 127  ·  Palmdale, Ca. 93550-3251  ·  Toll free: 1-800-962-6976  ·  Ph: 1-661-947-8485  ·  Fx: 1-661-947-8764

PRODUCTS PAGE  |  ROTARY CONVERTER  |  CNC ROTARY CONVERTER  |  VOLTAGE STABILIZER  |  STATIC CONVERTER  

POWER GENERATOR  |  FREQUENCY CONVERTER  |  CONTACT US  |  HOW TO ORDER  |  HOME PAGE