1. Name:
Phone # *
2. Fax #
E-mail:
3. Enter same e -mail
address for verification:
4. Address:
City:
5. State:
*
Zip Code:
Country of residence:
6. Your
Company Name:
_______________________________________________________________________________________________
Machine Information:
7. Type
of equipment (freezer, ice, walk-in, etc):
8. Machine
brand (not motor)
Model # of unit :
9. Capacity,
tons:
Country of mfr. of unit :
10.
LRA (L ocked R otor A mperage
rating - this information is very important )
11. Compressor
motor (main motor):
Country of mfr. of
motor
and brand of
motor
if known.
Nameplate voltage rating:
Horsepower:
FLA (Full Load Amp rating):
kW rating:
KVA rating:
The motor is:
Please Select
wye-wound
delta-wound
Don't Know
_______________________________________________________________________________________________
12.
Additional motors:
Condenser motor:
The motor is:
Please Select
three-phase
single-phase
Don't Know
Fill out the next 4 entries
ONLY if the motor is three-phase .
1.
HP:
2.
FLA:
3.
kW rating:
4.
The motor is:
Please Select
wye-wound
delta-wound
Don't Know
_______________________________________________________________________________________________
Evaporator motor:
The motor is:
Please Select
three-phase
single-phase
Don't Know
Fill out the next 4 entries
ONLY if the motor is three-phase .
1.
HP:
2.
FLA:
3.
kW rating:
4.
The motor is:
Please Select
wye-wound
delta-wound
Don't Know
_______________________________________________________________________________________________
13. Single-phase
voltage available:
Please Select
220V
440V
Don't Know
Cycles:
Please Select
60Hz
50Hz
Don't Know
14. 3-phase
voltage required
Please Select
220V
380V
440V
575V
Don't Know
Cycles:
Please Select
60Hz
50Hz
Don't Know
15. 3-phase
power required must be wye
or delta
doesn't matter
don't know
16.
CNC or other electronic controls
(variable frequency drives, rheostat, etc.):
Please Select
110 or 220V
single-phase only
There are some
220V three-phase controls
There are no electronic
controls
I
don't know if the controls are single-phase or three-phase
I don't
know if there are any electronic controls
17.
Remarks:
For further sizing assistance call technical support
at Phase-A-Matic, Inc.: 1- 800-962-6976
Also see sizing
information concerning:
Phase-A-Matic, Inc.
·
39450 3rd St. E., Ste. 127 ·
Palmdale, Ca. 93550-3251 ·
Toll free: 1-800-962-6976 ·
Ph: 1-661-947-8485 ·
Fx: 1-661-947-8764