Phase Converter manufacturer: Phase-A-Matic, Inc.Sizing Assistance
   HOME
.

.
Sizing Assistance For Lathes & HMC's

Fill in the following form for the proper sizing recommendation, one for each lathe. Then click on the SUBMIT BUTTON at the bottom of the page, and the form will be instantly sent via e-mail to the technical support staff at Phase-A-Matic, Inc. Once it is received, it will be reviewed by technical support to determine which converter would best suit your application, and you will be contacted by Phase-A-Matic, Inc. Thank you for your inquiry.

NOTE: Please fill in a phone or fax number, e-mail address or mailing address, or we cannot respond to this form.

1. Name:       Phone # *   

2. Fax #      E-mail:  

3. Enter same e-mail address for verification:

4. Address:   City:

5. State:  *    Zip Code:     Country of residence:

6. Your Company Name:
_______________________________________________________________________________________________
Machine Information:

7. Lathe brand (not motor)   Model of lathe

8. Country of mfr. of lathe    of motor

9. Nameplate voltage rating  Amperage rating    RPM

10. Is the motor a one or two-speed motor?

11. Horsepower:        kW rating:          KVA rating:

12. Single-phase voltage available:     Cycles:    

13. 3-phase voltage required           Cycles:

14. Percent of output required:    1-67%          68-100%

15. Does the lathe have a clutch? Yes   No
       (If headstock does NOT turn while motor starts, it does have a clutch)

16. Will the lathe start frequently? Yes        No

17. Will you be doing instant reversing as in rigid tapping? Yes        No

18. Does the machine stall out?   Yes       No

19. Motor is:

20. 3-phase power required must be:

21. If the machine is a CNC machine, does it have regenerative braking? Yes       No

22. CNC or other electronic controls (rheostat, variable frequency drive, etc.):
     

23. Remarks:

For further sizing assistance call technical support at Phase-A-Matic, Inc.: 1-800-962-6976 

Also see sizing information concerning:

Phase-A-Matic, Inc.  ·  39450 3rd St. E., Ste. 127  ·  Palmdale, Ca. 93550-3251  ·  Toll free: 1-800-962-6976  ·  Ph: 1-661-947-8485  ·  Fx: 1-661-947-8764

PRODUCTS PAGE  |  ROTARY CONVERTER  |  CNC ROTARY CONVERTER  |  VOLTAGE STABILIZER  |  STATIC CONVERTER  

POWER GENERATOR  |  FREQUENCY CONVERTER  |  CONTACT US  |  HOW TO ORDER  |  HOME PAGE