Fill in the following form for the proper sizing recommendation, one for each machine. Then click on the SUBMIT button at the bottom of this form. The form will be instantly sent via e-mail to the technical support staff at Phase-A-Matic. Once it is received, it will be reviewed by technical support to determine which converter would best suit your application, and you will be contacted by Phase-A-Matic, Inc. Thank you for your inquiry.

NOTE: Please fill in a phone or fax number, e-mail address or mailing address, or we cannot respond to this form.

Please fill out information below and click “Submit”.

    Machine Information

    1.    
    2.    
    3.        
    4. Is the motor a one or two-speed?        Motor is  
    5.        
    6. Single-phase voltage available        Cycles >
    7. 3-phase voltage required        Cycles
    8. Percent of output required   
    9. Does this have a heavy starting load?   Yes     No
    10. Does this start frequently?   Yes     No
    11. Does this instant reverse?   Yes     No
    12. Yes     No
    13. It is   Belt Drive     direct drive     gear drive
    14. It has   flywheel     hydraulic pump     neither
    15. Motor is   
    16. CNC or other electronic controls (rheostat, variable frequency drive, etc.)   
    17. If it is a CNC machine, does it have regenerative braking?  Yes     No
    18.    

    For further sizing assistance call technical support at Phase-A-Matic, Inc.: 1-800-962-6976